您好,欢迎来到米朗科技官网!主营:电子尺、各类位移传感器拉绳/线位移传感器磁致伸缩位移/液位传感器等传感器、集中润滑油泵及配件。ENGLISH WEBSITE
产品中心


中国工业强基重点产品
中国工信部传感器一条龙应用计划示范企业(米朗科技)
中国工信部高精度传感器一条龙应用计划示范项目24H热线电话:18988775303       

产品中心Product Categories

米朗MIRAN位移传感器和润滑油泵源头厂家品质图标
米朗MRH-1232-100TB微电脑型全自动油脂泵Product introduction 您现在的位置:首 页 > 产品展示 > 产品详情
米朗MRH-1232-100TB微电脑型全自动油脂泵
  • 产品详情
  • Product introduction

  • 米朗MRH-1232-100TB微电脑型全自动油脂泵产品及尺寸图



    1 .加油时间由控制面板右侧的上升(U P延长时间) 和下降(D O W N缩短时间)按键设定, 最长加油时间可达2 0 0秒, 精度为1秒。间歇时间由控制面板左侧的上升(U P延长时间) 和下降(D O W N缩短时间)按键设定, 间歇时间最长可达9 9 9分钟, 精度为0 . 1分钟。时间设定时按一次按键, 跳动数为1,按住按键不放,跳动可以加速,所有设定在设定完成后,按(M a n )键后,即刻生效。
    2 .当油泵显示E R P报警时, 表示压力不足, 检查压力正常时,轻按一下(M a n )按键, 消除报警。
    3 .当油泵显示E R O时,表示油量不足,加油后自动消除报警。
    4 .按住(M a n )按键不放为点动测试。
    ( 可根据客户需要定做专属润滑方案)

    1.Fuel supply time is set by the UP button(extending the time) and DOWN button(shortening the time) on the right side of the control panel, which can reach up to 200 seconds, with the precision of 1 second. Intermittent time is set by the UP button(extending the time) and DOWN button(shortening the time) on the left side of
    the control panel, which can reach up to 999 minutes, with the precision of 0.1 minute.When setting the time, the beat number is 1 if you press the button once. The beat number can be accelerated if you hold down the button. All the settings will take effect immediately after the setting is completed or after the Man button is pressed.
    2.When the oil pump shows the EPR alarm, it indicates that the pressure is insufficient. If the the pressure is normal, press the Man button to eliminate the alarm.
    3.When the oil pump shows the ERO alarm, the oil quantity is insufficient, and the alarm will be automatically eliminated after refueling.
    4.Holding down the Man button is dynamic test.
    (specific lubrication plan can be customized)